Powerful Pneumatic Stone Cutter for Industrial Applications
Looking for this great saw but in a full Rail System Saw try Alpha PSC-150 Miter Cutting Rail Saw System
Alpha™ is excited to introduce a new industrial quality pneumatic stone cutter, called the PSC-150, which is equipped with a 2 hp motor, with a speed governor in the motor that regulates the air consumption according to the torque needed for the application. This regulation includes producing enough torque to cut 1-1/4″ (3cm) stone slabs in one pass. In addition, Alpha™ recognized the need for an industrial quality portable stone cutter that is capable of miter cutting of 1-1/4″ (3cm) materials with ease, so that any stone fabricator can use it when miter cuts are required, without time-consuming setup. Since it is a pneumatic powered motor, you can save the repair and maintenance costs of electric stone cutters when sink-hole cutting and groove-cutting for rodding applications. Alpha™ offers a carriage that retrofits on the Alpha™ Guide Rail System to support the application of making precise miter cuts for the perfect lamination. The PSC-150 offers kink-free water and air hoses to improve the maneuverability of the stone cutter. The flexibility of the hoses helps reduce operator fatigue and improves the operation. To ensure a long maintenance interval, we also recommend using the manifold system that comes with a regulator and filter to catch the debris and moisture delivered by compressed air. The Alpha™ PSC-150 comes with an Eclipse II 6″ blade which is the recommended turbo blade for granite and engineered stone. It can utilize a variety of consumables including the Alpha™ Katana 6″ for porcelain panels and slabs, Hot-Rod 4″ for 1/4″ steel rods and 1/8″ fiber glass rods. For marble applications, a Libero 5″ blade is recommended since most marble slabs are 3/4″ (2cm) thick or less.
Powerful 2hp Motor; Can Be Used Wet or Dry! Low Maintenance; Produces Precise Miter Cuts!
Features
- 2 HP Pneumatic Powered Motor with Speed Governor
- Capable of Miter Cutting 1-1/4″ Material With Ease
- Kink-Free Water and Air- Hoses for Easy Maneuverability and Reducing Operator Fatigue
- Great For Sink-Hole Cutting, Groove Cutting and Rodding Applications
- Comes With an Eclipse II 6″ Blade and a bottle of Rust Inhibitor Oil
- Can Be Used Wet or Dry
- One Year Warranty* (*See manual for details)
Product Details
- Model PSC-150
- Air Pressure 90 PSI
- Air Consumption Min 32 CFM / 1HP*
- Air Consumption Max 48 CFM / 2HP
- No Load RPM 8,500 RPM
- Air Inlet 3/8″ NPSM
- Water Inlet 1/4″ BSPP
- Arbor 7/8″ / 22mm
- Max. HP 2.0 HP
- Cutting Disc Diameter 6″ / 150mm
- Note: *To control the amount of CFM required, use the reduced flow air inlet fitting 3001-0084
Equipment Included
- Flanges 3
- Bolts (M6X30 Left) / (M6x20 Left) 2
- Side Handle 1
- Combination Wrench (9mm) 1
- Hex Wrench (5mm) 1
- Open End Spanner Wrench (22mm) 1
- Air Hose (15ft / 4.5m) 1
- Water Hose (15ft / 4.5m) 1
- Rust Inhibitor Oil (8oz / 237ml) (AIR-008) 1
- Alpha™ Eclipse II 6″ Blade (DEE006) 1
| Part No. | Size | Thickness | Maximum RPM | Arbor(s) | Recommended For | For Use On | Description |
|---|---|---|---|---|---|---|---|
| PSC-150 | 6″ | 7/8″ | Granite/Eng.Stone | Pneumatic Stone Cutter | |||
| DEE006 | 6″ | 2.1mm | 10,100 | 7/8″, 5/8″,◊ | Stone Cutter/Angle Grinder | ||
| AIR-008 | Pneumatic Tools | Rust Inhibitor Oil 8oz (237ml) |
